James grew up on an Ozarks farm where tools like axes and picks were still used in the daily routine and the blades of stockman's pocketknives served their original functions. Receiving his first pocketknife at age four he got it open by himself nearly a year later and spent his formative years wandering the woods with a succession of ever larger knives, a book of matches and a rifle.
A veteran of Vietnam, James also served in Alaska during a stint in the Army, receiving his first intensive culinary training by setting a record for extra KP at Ft. Richardson.
Settling in the Pacific Northwest after his discharge, James crewed on sailing yachts in local races, backpacked hundreds of miles of mountain trails in search of good trout fishing, and occasionally attended college.
His first serious job as a civilian resulted from answering a Seattle Post Intelligencer want ad requesting someone who could lift 120 pounds repeatedly and wasn't afraid of fire. James apprenticed to John Frazier -- the most knowledgeable traditional foundryman in North America at that time -- for the next six years.
Returning to the Ozarks James made his living by growing ginseng on a hand-terraced wooded hillside and selling handmade wood turnery, furniture, sculpture and architectural carvings. James harvested trees from his own land, processing logs into posts and beams and turnery billets with saws, axes, froes and planes. Since many tools he needed were no longer available, James built his own forge from a barbeque grill, a vacuum cleaner and a 55 gallon steel drum, found a chunk of railroad track for his first anvil, and taught himself blacksmithing -- creating his own knives and tools from scrap steel and sweat.
Changing economic pressures eventually forced James back to the restaurant industry in Branson, Missouri, and later to even more success as a maintenance engineer for one of Branson's largest condominium resorts. Finally escaping to Indiana, James now makes his living telling true stories as a freelance writer.
These Henckels Kitchen Shears, forged from Henckels’ usual Solingen stainless steel, feature short high leverage blades and composite polymer handles. Lightweight but strong, the handles are unbreakable. Steel inserts allow them to be used for loosening jar lids.
Under the decorative red cap that joins the jaws is a screw fitting which allows users to take the shears apart for cleaning. Unlike slip joint shears that rotate on fixed rivets, these shears can be tightened with that same screw if the action becomes loose.
Microserrations on the upper jaw helps grip slippery foods during cutting. With proper care and use, sharpening should rarely be needed; when it is necessary, the lower jaw–which has a plain edge–can be sharpened at home.
These scissors should not be used to cut metal–not even copper wire, which might be very tempting considering that the high leverage build of these shears makes them look like they’d do that well. Should you have any doubts about the composite construction, Henckels applies the same lifetime warranty to these shears that it gives to its other fine products.
Wash and dry by hand–modern stainless steel often does not do well in a dishwasher’s high heat and harsh detergents.
James grew up on an Ozarks farm where tools like axes and picks were still used in the daily routine and the blades of stockman's pocketknives served their original functions. Receiving his first pocketknife at age four he got it open by himself nearly a year later and spent his formative years wandering the woods with a succession of ever larger knives, a book of matches and a rifle.
A veteran of Vietnam, James also served in Alaska during a stint in the Army, receiving his first intensive culinary training by setting a record for extra KP at Ft. Richardson.
Settling in the Pacific Northwest after his discharge, James crewed on sailing yachts in local races, backpacked hundreds of miles of mountain trails in search of good trout fishing, and occasionally attended college.
His first serious job as a civilian resulted from answering a Seattle Post Intelligencer want ad requesting someone who could lift 120 pounds repeatedly and wasn't afraid of fire. James apprenticed to John Frazier -- the most knowledgeable traditional foundryman in North America at that time -- for the next six years.
Returning to the Ozarks James made his living by growing ginseng on a hand-terraced wooded hillside and selling handmade wood turnery, furniture, sculpture and architectural carvings. James harvested trees from his own land, processing logs into posts and beams and turnery billets with saws, axes, froes and planes. Since many tools he needed were no longer available, James built his own forge from a barbeque grill, a vacuum cleaner and a 55 gallon steel drum, found a chunk of railroad track for his first anvil, and taught himself blacksmithing -- creating his own knives and tools from scrap steel and sweat.
Changing economic pressures eventually forced James back to the restaurant industry in Branson, Missouri, and later to even more success as a maintenance engineer for one of Branson's largest condominium resorts. Finally escaping to Indiana, James now makes his living telling true stories as a freelance writer.
The Diamond Edge Pro knife and scissors sharpener from Smith Abrasives combines electric and manual sharpening systems for quick and accurate refurbishing of knives...
These Henckels Kitchen Shears, forged from Henckels’ usual Solingen stainless steel, feature short high leverage blades and composite polymer handles. Lightweight but strong, the handles are unbreakable. Steel inserts allow them to be used for loosening jar lids.
